Main features: 1, the base station call box with power locks, used to start and shut down the elevator control circuit. 2, the layers are electrical interlock door switch, when any one door is opened, the elevator stops running. 3, each door has a mechanical lock, when the car is not in this landing dock, landing doors can not be opened, such as special circumstances, can be used with our special key ladder equipped with landing doors open. 4, with the arrival beep prompts. 5, car position from the digital display floor. 6, the direction indicated by the vertical line luminous arrow. 7, press the call button, the call button Digital indicator light layer revocation memories after arriving, lights off. 8, when the elevator is not in maintenance or emergency stop, for some reason (such as power outages, improper operation, etc.) of the car did not stop at any one leveling position, the system will automatically run the car to leveling position, this When the lift will not respond to any calls. Fifth, pantry elevator use and safe handling 1. Preparations before the elevator with: (1) A driver shall, before working day, the first elevator, down the pilot several times to check for faults and irregularities. (2) the role of the driver should verify the contacts and lock the door and try to make off the elevator car movement should stop immediately. (3) It should be noted the car stop landing leveling accuracy, no significant abnormal gap. 2. Note elevator in motion: (1) The driver in the service time can not be absent without leave, when such is required to leave the hall door shall close. (2) shall be responsible for overseeing the car driver does not exceed the rated load weight. (3) the elevator does not allow the transport of flammable, explosive and other dangerous goods. (4) must start before the elevator doors closed elevator seal, it is prohibited in the case of the elevator door opened, starting the elevator for general travel. (5) on the car roof, removed equipment belonging to an elevator fixed shall not store other items; in addition to maintenance personnel, other people may not enter. (6) the elevator at work, non-wiping, lubrication or repair parts. 3. Beneath the normal working elevator malfunction occur or should immediately notify maintenance personnel for repair, if there is danger or could cause physical, mechanical accident, should be immediately suspended, cut off the main power room, report management, and carry out a detailed examination to be repaired Before being allowed to use. 4. Elevator suspended after work: (1) When the elevator work is completed, the driver of the car should return the base station. (2) should be checked before leaving the driver when the car inside and outside Guangzhou, the lights go off.